Waste Oil Drainers

Art. 3185 – 3185/110

Mobile low level gravity waste oil drainer, suitable for the draining of motor oil, gear oil or differential oil from trucks and passenger cars. Available with collection capacity of 70 l and 110 l, with anti splash grid and removable, lateral antisplash guard (optional). The unit can be discharged by gravity through the laterally mounted 3/4” drain valve or by using an evacuation pump with suction hose and female quick coupling to be connected to the male coupling installed on the drainer.

Art. 3185/20

Mobile low level gravity waste oil drainer such as above, but in height-reduced version, ideal for the use with passenger cars with sports chassis.

Art. 3186 – 3186/110

Pit gravity waste oil drainer, suitable for the draining of motor oil, gear oil or differential oil from trucks and passenger cars. Available with collection capacity of 70 l and 110 l, with anti splash grid and metal rollers. Suitable for the use in service pits between the pit rails. It is possible to adapt the width according to the pit dimensions. The unit can be discharged by gravity through the laterally mounted 3/4” drain valve or by using an evacuation pump with suction hose and female quick coupling to be connected to the male coupling installed on the drainer.

Art. 3254 – 3254/110

Mobile low level gravity drainer, suitable for the draining of waste oils and antifreeze from trucks and passenger cars by using the included pump kit for the eventual refi lling of the liquid into the motor or circuit after finishing the service.
Available with collection capacity of 70 l and 110 l, with anti splash grid.
The pump kit art.no. 3246 consists of a pneumatic rotary pump, pressure regulator with manometer, suction hose and dispensing hose with control gun and rigid outlet pipe.

Art. 3292

Waste oil draining kit for the installation in service pits, with metal collection bowl of 10 l capacity incl. removable anti splash grid and height-adjustable, telescopic tube with wall mounted swivel arm in galvanized steel.

Art. 2046 – 2044

Waste oil evacuation and transfer kit, consisting of a 1:1 – (art. no. 2044) or a 2:1 – (art. no. 2046) single acting pneumatic piston pump, wall bracket, 1.5 m – rubber suction hose ø 1” and foot valve with stainless steel strainer.

Art. 2264

Waste oil and waste antifreeze evacuation kit , consisting of hydraulic quick coupling with connection 1” BSP (F), hydraulic quick connector with connection 1” BSP (F) and connection adapter with connection 1” BSP (MM), with non-return valve. The kit is necessary to carry out the evacuation of waste oil drainers or waste oil suction units by connecting the hydraulic quick coupling to the suction hose of evacuation kits art. no. 2046 or art. no. 2044 (instead of the installed foot valve) and the quick connector to the waste oil drainer or waste oil suction unit to be discharged.

Art. 8319

Pneumatic double diaphragm pump, selfpriming up to 5 m suction lift, working also in dry running condition, without any electric drive, suitable for the use also with fluids of higher viscosity and for fluids containing particles up to 3,5 mm size, body in PP, diaphragms in NBR + PTFE, balls in PTFE, o – rings in EPDM, seats in PP.

Art. 7818 Wall mounting bracket for pneumatic diaphragm pumps art. nos. 8319.